Free feather SVG

Quill pen SVG

Quill pen, as a solid black shape — Quill pen. The preview is the SVG file itself.

A feather trimmed into a writing quill: the lower barbs stripped away and the bare shaft cut to a point. For writers, book clubs and stationery.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	20 × 100 mm (0.8 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	326 mm at this size
Narrowest part	1.7 mm at this size
Nodes	41 curve and line segments

Measured from the file. PNG: 469 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.2 × 1 in (5 × 25 mm)	0.43 mm	83 mm	300	Too fine for most machines
0.41 × 2 in (10 × 51 mm)	0.86 mm	166 mm	100	Fine detail: vinyl and paper only, weed with care
0.61 × 3 in (16 × 76 mm)	1.3 mm	248 mm	45	Vinyl, card and thin sheet
0.82 × 4 in (21 × 102 mm)	1.7 mm	331 mm	24	Vinyl, card and thin sheet
1.22 × 6 in (31 × 152 mm)	2.6 mm	497 mm	8	Vinyl, card and thin sheet
1.63 × 8 in (41 × 203 mm)	3.5 mm	662 mm	6	Any material, including 3 mm wood and acrylic
2.45 × 12 in (62 × 305 mm)	5.2 mm	994 mm	4	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More feather SVG files

← Two crossed feathers All 14 feathers Feather outline →