Free feather SVG

Ragged feather with split vanes SVG

Ragged feather with split vanes, as a solid black shape — Ragged feather with split vanes. The preview is the SVG file itself.

A well-worn feather whose barbs have parted in nine places, some deep and some shallow, either side of a clear shaft line.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	33 × 100 mm (1.28 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	6: 1 outer edge and 5 cut-outs
Cut length	568 mm at this size
Narrowest part	1.8 mm at this size
Nodes	131 curve and line segments

Measured from the file. PNG: 704 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.33 × 1 in (8 × 25 mm)	0.46 mm	144 mm	230	Too fine for most machines
0.65 × 2 in (17 × 51 mm)	0.91 mm	289 mm	70	Fine detail: vinyl and paper only, weed with care
0.98 × 3 in (25 × 76 mm)	1.4 mm	433 mm	30	Vinyl, card and thin sheet
1.3 × 4 in (33 × 102 mm)	1.8 mm	577 mm	16	Vinyl, card and thin sheet
1.96 × 6 in (50 × 152 mm)	2.7 mm	866 mm	5	Vinyl, card and thin sheet
2.61 × 8 in (66 × 203 mm)	3.7 mm	1,154 mm	4	Any material, including 3 mm wood and acrylic
3.91 × 12 in (99 × 305 mm)	5.5 mm	1,731 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More feather SVG files

← Feather silhouette All 14 feathers Boho feather with barb slots →