Free feather SVG

Line feather with barbs SVG

Line feather with barbs, drawn as a line — Line feather with barbs. The preview is the SVG file itself.

No outline at all: a shaft with twenty-two pairs of barbs drawn as single lines, longest in the middle. Light and airy, for pen plotters, foil and fine vinyl.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	33 × 100 mm (1.3 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	1,251 mm at this size
Narrowest part	1.6 mm at this size
Nodes	383 curve and line segments

Measured from the file. PNG: 713 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.33 × 1 in (8 × 25 mm)	0.41 mm	318 mm	220	Too fine for most machines
0.66 × 2 in (17 × 51 mm)	0.81 mm	636 mm	70	Fine detail: vinyl and paper only, weed with care
0.99 × 3 in (25 × 76 mm)	1.2 mm	953 mm	30	Vinyl, card and thin sheet
1.32 × 4 in (34 × 102 mm)	1.6 mm	1,271 mm	16	Vinyl, card and thin sheet
1.99 × 6 in (50 × 152 mm)	2.4 mm	1,907 mm	5	Vinyl, card and thin sheet
2.65 × 8 in (67 × 203 mm)	3.3 mm	2,542 mm	4	Any material, including 3 mm wood and acrylic
3.97 × 12 in (101 × 305 mm)	4.9 mm	3,813 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More feather SVG files

← Feather outline All 14 feathers Classic feather →