Free feather SVG

Feather outline SVG

Feather outline, drawn as a line — Feather outline. The preview is the SVG file itself.

The vane drawn as a line about 2 mm wide around a solid shaft, with a soft curve. For colouring pages, embroidery and foil.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	31 × 100 mm (1.2 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	518 mm at this size
Narrowest part	2.5 mm at this size
Nodes	57 curve and line segments

Measured from the file. PNG: 663 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.31 × 1 in (8 × 25 mm)	0.64 mm	132 mm	240	Fine detail: vinyl and paper only, weed with care
0.61 × 2 in (15 × 51 mm)	1.3 mm	263 mm	75	Vinyl, card and thin sheet
0.91 × 3 in (23 × 76 mm)	1.9 mm	395 mm	30	Vinyl, card and thin sheet
1.22 × 4 in (31 × 102 mm)	2.5 mm	526 mm	16	Vinyl, card and thin sheet
1.83 × 6 in (46 × 152 mm)	3.8 mm	789 mm	6	Any material, including 3 mm wood and acrylic
2.44 × 8 in (62 × 203 mm)	5.1 mm	1,053 mm	4	Any material, including 3 mm wood and acrylic
3.66 × 12 in (93 × 305 mm)	7.6 mm	1,579 mm	3	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More feather SVG files

← Quill pen All 14 feathers Line feather with barbs →