Free Father SVG

Father with a swash underline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Father with a swash underline, as a solid black shape
Father with a swash underline. The preview is the SVG file itself.

“Father” in Pacifico script with a tapering swash swept underneath it, welded to the word where a letter dips down to meet it, or sitting just below it where none does.

What is in the file

Size100 × 39 mm (3.94 × 1.54 in), scales to any size
Pieces3 separate pieces
Outlines to cut7: 3 outer edges and 4 cut-outs
Cut length830 mm at this size
Narrowest part2 mm at this size
Nodes226 curve and line segments

Measured from the file. PNG: 2,000 × 829 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.39 in (25 × 10 mm)0.51 mm211 mm200Fine detail: vinyl and paper only, weed with care
2 × 0.78 in (51 × 20 mm)1 mm422 mm60Vinyl, card and thin sheet
3 × 1.17 in (76 × 30 mm)1.5 mm632 mm24Vinyl, card and thin sheet
4 × 1.56 in (102 × 40 mm)2 mm843 mm12Vinyl, card and thin sheet
6 × 2.35 in (152 × 60 mm)3 mm1,265 mm4Any material, including 3 mm wood and acrylic
8 × 3.13 in (203 × 79 mm)4.1 mm1,687 mm3Any material, including 3 mm wood and acrylic
12 × 4.69 in (305 × 119 mm)6.1 mm2,530 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Father SVG files

← Father in block capitals All 13 Father designs Father with stars →