Free Father SVG

Father with a drop shadow SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Father with a drop shadow, in layered colours
Father with a drop shadow. The preview is the SVG file itself.

“Father” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.

What is in the file

Size100 × 33 mm (3.94 × 1.31 in), scales to any size
Pieces3 separate pieces
Outlines to cut14: 3 outer edges and 11 cut-outs
Cut length1,075 mm at this size
Narrowest part1.4 mm at this size
Nodes311 curve and line segments
Layers2: shadow and words

Measured from the file. PNG: 2,000 × 717 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.33 in (25 × 8 mm)0.36 mm273 mm220Too fine for most machines
2 × 0.67 in (51 × 17 mm)0.71 mm546 mm70Fine detail: vinyl and paper only, weed with care
3 × 1 in (76 × 25 mm)1.1 mm819 mm30Vinyl, card and thin sheet
4 × 1.33 in (102 × 34 mm)1.4 mm1,092 mm14Vinyl, card and thin sheet
6 × 2 in (152 × 51 mm)2.1 mm1,638 mm5Vinyl, card and thin sheet
8 × 2.66 in (203 × 68 mm)2.8 mm2,184 mm4Vinyl, card and thin sheet
12 × 4 in (305 × 101 mm)4.3 mm3,277 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Father SVG files

← Father stencil plate All 13 Father designs Father with a handlebar moustache →