Free Father SVG

Father in block capitals SVG

Father in block capitals, as a solid black shape
Father in block capitals. The preview is the SVG file itself.

“FATHER” in the tall, narrow capitals of Bebas Neue. Each letter is a separate piece with thick, even strokes.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 33 mm (3.94 × 1.28 in), scales to any size
Pieces6 separate pieces
Outlines to cut8: 6 outer edges and 2 cut-outs
Cut length766 mm at this size
Narrowest part3.9 mm at this size
Nodes79 curve and line segments

Measured from the file. PNG: 2,000 × 702 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.33 in (25 × 8 mm)0.99 mm195 mm230Fine detail: vinyl and paper only, weed with care
2 × 0.65 in (51 × 17 mm)2 mm389 mm70Vinyl, card and thin sheet
3 × 0.98 in (76 × 25 mm)3 mm584 mm30Vinyl, card and thin sheet
4 × 1.3 in (102 × 33 mm)4 mm778 mm16Any material, including 3 mm wood and acrylic
6 × 1.95 in (152 × 50 mm)5.9 mm1,167 mm5Any material, including 3 mm wood and acrylic
8 × 2.6 in (203 × 66 mm)7.9 mm1,557 mm4Any material, including 3 mm wood and acrylic
12 × 3.9 in (305 × 99 mm)12 mm2,335 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Father SVG files

← Father in Amatic SC All 12 Father designs Father with a swash underline →