Free Father SVG

Father in Pacifico SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Father in Pacifico, as a solid black shape
Father in Pacifico. The preview is the SVG file itself.

“Father” set in Pacifico, a bold brush script. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

What is in the file

Size100 × 31 mm (3.94 × 1.23 in), scales to any size
Pieces2 separate pieces
Outlines to cut6: 2 outer edges and 4 cut-outs
Cut length645 mm at this size
Narrowest part2.1 mm at this size
Nodes187 curve and line segments

Measured from the file. PNG: 2,000 × 679 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.31 in (25 × 8 mm)0.53 mm164 mm230Fine detail: vinyl and paper only, weed with care
2 × 0.63 in (51 × 16 mm)1.1 mm328 mm70Vinyl, card and thin sheet
3 × 0.94 in (76 × 24 mm)1.6 mm491 mm30Vinyl, card and thin sheet
4 × 1.25 in (102 × 32 mm)2.1 mm655 mm16Vinyl, card and thin sheet
6 × 1.88 in (152 × 48 mm)3.2 mm983 mm5Any material, including 3 mm wood and acrylic
8 × 2.5 in (203 × 64 mm)4.3 mm1,311 mm4Any material, including 3 mm wood and acrylic
12 × 3.76 in (305 × 95 mm)6.4 mm1,966 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Father SVG files

← Father with a handlebar moustache All 13 Father designs Father in Lobster →