Free Father SVG

Father with stars SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Father with stars, as a solid black shape
Father with stars. The preview is the SVG file itself.

“Father” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.

What is in the file

Size100 × 62 mm (3.94 × 2.45 in), scales to any size
Pieces8 separate pieces
Outlines to cut10: 8 outer edges and 2 cut-outs
Cut length838 mm at this size
Narrowest part1.6 mm at this size
Nodes199 curve and line segments

Measured from the file. PNG: 2,000 × 1,273 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.62 in (25 × 16 mm)0.41 mm213 mm140Too fine for most machines
2 × 1.24 in (51 × 32 mm)0.81 mm426 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.87 in (76 × 47 mm)1.2 mm639 mm15Vinyl, card and thin sheet
4 × 2.49 in (102 × 63 mm)1.6 mm851 mm8Vinyl, card and thin sheet
6 × 3.73 in (152 × 95 mm)2.4 mm1,277 mm3Vinyl, card and thin sheet
8 × 4.98 in (203 × 126 mm)3.3 mm1,703 mm2Any material, including 3 mm wood and acrylic
12 × 7.46 in (305 × 190 mm)4.9 mm2,554 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Father SVG files

← Father with a swash underline All 13 Father designs Father outline lettering →