Father stencil plate SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A rounded plate with “FATHER” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.
What is in the file
| Size | 100 × 39 mm (3.94 × 1.52 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 7: 1 outer edge and 6 cut-outs |
| Cut length | 805 mm at this size |
| Narrowest part | 1.4 mm at this size |
| Nodes | 157 curve and line segments |
Measured from the file. PNG: 2,000 × 819 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.39 in (25 × 10 mm) | 0.36 mm | 204 mm | 200 | Too fine for most machines |
| 2 × 0.77 in (51 × 20 mm) | 0.71 mm | 409 mm | 60 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.16 in (76 × 29 mm) | 1.1 mm | 613 mm | 24 | Vinyl, card and thin sheet |
| 4 × 1.54 in (102 × 39 mm) | 1.4 mm | 818 mm | 12 | Vinyl, card and thin sheet |
| 6 × 2.32 in (152 × 59 mm) | 2.1 mm | 1,227 mm | 4 | Vinyl, card and thin sheet |
| 8 × 3.09 in (203 × 78 mm) | 2.8 mm | 1,636 mm | 3 | Vinyl, card and thin sheet |
| 12 × 4.63 in (305 × 118 mm) | 4.3 mm | 2,454 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Father SVG files
-
Father with a drop shadow Layered · 3 pieces
-
Father with a handlebar moustache Solid · 3 pieces
-
Father in Pacifico Solid · 2 pieces
-
Father in Lobster Solid · 2 pieces
-
Father in Kaushan Script Solid · 6 pieces
-
Father in Lilita One Solid · 6 pieces
-
Father in Alfa Slab One Solid · 6 pieces
-
Father in Amatic SC Solid · 6 pieces
← Father outline lettering All 13 Father designs Father with a drop shadow →