Free elk SVG

Elk outline SVG

Elk outline, drawn as a line — Elk outline. The preview is the SVG file itself.

The standing bull elk drawn as one even line about 2 mm wide, antlers and all, with the gaps between the legs left open. For colouring pages, foil, engraving and pen plotters.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	75 × 100 mm (2.96 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	983 mm at this size
Narrowest part	1.6 mm at this size
Nodes	504 curve and line segments

Measured from the file. PNG: 1,523 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.75 × 1 in (19 × 25 mm)	0.41 mm	250 mm	120	Too fine for most machines
1.5 × 2 in (38 × 51 mm)	0.81 mm	499 mm	35	Fine detail: vinyl and paper only, weed with care
2.26 × 3 in (57 × 76 mm)	1.2 mm	749 mm	12	Vinyl, card and thin sheet
3.01 × 4 in (76 × 102 mm)	1.6 mm	999 mm	6	Vinyl, card and thin sheet
4.51 × 6 in (115 × 152 mm)	2.4 mm	1,498 mm	2	Vinyl, card and thin sheet
6.02 × 8 in (153 × 203 mm)	3.3 mm	1,997 mm	1	Any material, including 3 mm wood and acrylic
9.02 × 12 in (229 × 305 mm)	4.9 mm	2,996 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More elk SVG files

← Elk antler monogram frame All 13 elk Layered elk in four colours →