Free elk SVG

Elk head from the side SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Elk head from the side, as a solid black shape
Elk head from the side. The preview is the SVG file itself.

The head, maned neck and both antlers of a bull elk in profile, cut off at the shoulder like a mount. Large enough to show the eye, the nostril and every tine, for a plaque or a cabin sign.

What is in the file

Size63 × 100 mm (2.46 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length459 mm at this size
Narrowest part1 mm at this size
Nodes192 curve and line segments

Measured from the file. PNG: 1,281 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.63 × 1 in (16 × 25 mm)0.25 mm117 mm140Too fine for most machines
1.25 × 2 in (32 × 51 mm)0.51 mm233 mm40Fine detail: vinyl and paper only, weed with care
1.88 × 3 in (48 × 76 mm)0.76 mm350 mm15Fine detail: vinyl and paper only, weed with care
2.5 × 4 in (64 × 102 mm)1 mm466 mm8Vinyl, card and thin sheet
3.76 × 6 in (95 × 152 mm)1.5 mm700 mm3Vinyl, card and thin sheet
5.01 × 8 in (127 × 203 mm)2 mm933 mm2Vinyl, card and thin sheet
7.51 × 12 in (191 × 305 mm)3 mm1,399 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More elk SVG files

← Bugling bull elk All 13 elk Elk antlers →