Elk silhouette SVG
A bull elk standing in profile with its head high: a thick maned neck, a long face, long legs, a short tail and two antlers that sweep up and back with six points each. Nothing to weed.
Free for personal and commercial use, no sign-up. What you can do with it.
This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.
What is in the file
| Size | 75 × 100 mm (2.96 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 560 mm at this size |
| Narrowest part | 3.4 mm at this size |
| Nodes | 290 curve and line segments |
Measured from the file. PNG: 1,523 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.75 × 1 in (19 × 25 mm) | 0.86 mm | 142 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 1.5 × 2 in (38 × 51 mm) | 1.7 mm | 284 mm | 35 | Vinyl, card and thin sheet |
| 2.26 × 3 in (57 × 76 mm) | 2.6 mm | 427 mm | 12 | Vinyl, card and thin sheet |
| 3.01 × 4 in (76 × 102 mm) | 3.5 mm | 569 mm | 6 | Any material, including 3 mm wood and acrylic |
| 4.51 × 6 in (115 × 152 mm) | 5.2 mm | 853 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.02 × 8 in (153 × 203 mm) | 6.9 mm | 1,138 mm | 1 | Any material, including 3 mm wood and acrylic |
| 9.02 × 12 in (229 × 305 mm) | 10 mm | 1,707 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.