Free elk SVG

Elk head from the front SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Elk head from the front, as a solid black shape
Elk head from the front. The preview is the SVG file itself.

A bull elk facing you like a shoulder mount: a long face, an ear each side, a ragged mane down the neck and a tall rack with six points a side. Exactly symmetrical and all one piece.

What is in the file

Size61 × 100 mm (2.41 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut8: 1 outer edge and 7 cut-outs
Cut length713 mm at this size
Narrowest part1.4 mm at this size
Nodes279 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,254 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.61 × 1 in (16 × 25 mm)0.36 mm181 mm150Too fine for most machines
1.22 × 2 in (31 × 51 mm)0.71 mm362 mm40Fine detail: vinyl and paper only, weed with care
1.84 × 3 in (47 × 76 mm)1.1 mm543 mm15Vinyl, card and thin sheet
2.45 × 4 in (62 × 102 mm)1.4 mm724 mm8Vinyl, card and thin sheet
3.67 × 6 in (93 × 152 mm)2.1 mm1,087 mm3Vinyl, card and thin sheet
4.9 × 8 in (124 × 203 mm)2.8 mm1,449 mm2Vinyl, card and thin sheet
7.34 × 12 in (187 × 305 mm)4.3 mm2,173 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More elk SVG files

← Layered elk in four colours All 13 elk Elk silhouette →