Free door SVG

Front porch with a door and steps SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Front porch with a door and steps, as a solid black shape
Front porch with a door and steps. The preview is the SVG file itself.

A covered porch: a gabled roof with a round vent on four columns, a panelled door with four panes, a railing each side, a hanging basket in each bay and three steps up.

What is in the file

Size100 × 92 mm (3.94 × 3.61 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut29: 1 outer edge and 28 cut-outs
Cut length1,663 mm at this size
Narrowest part1.1 mm at this size
Nodes256 curve and line segments

Measured from the file. PNG: 2,000 × 1,842 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.92 in (25 × 23 mm)0.28 mm422 mm100Too fine for most machines
2 × 1.84 in (51 × 47 mm)0.56 mm845 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.75 in (76 × 70 mm)0.84 mm1,267 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.67 in (102 × 93 mm)1.1 mm1,690 mm6Vinyl, card and thin sheet
6 × 5.51 in (152 × 140 mm)1.7 mm2,534 mm2Vinyl, card and thin sheet
8 × 7.34 in (203 × 187 mm)2.2 mm3,379 mm1Vinyl, card and thin sheet
12 × 11.02 in (305 × 280 mm)3.4 mm5,069 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More door SVG files

← Saloon door with swinging leaves All 15 doors French doors with glass panes →