Free door SVG

Front door with a fanlight SVG

Front door with a fanlight, as a solid black shape
Front door with a fanlight. The preview is the SVG file itself.

A house front door: a fanlight of six panes over a door with six openings, a glazed sidelight each side, a wall lantern and a clipped ball tree in a pot at each side, and two steps.

Free for personal and commercial use, no sign-up. What you can do with it.

This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.

What is in the file

Size96 × 100 mm (3.8 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut24: 1 outer edge and 23 cut-outs
Cut length1,701 mm at this size
Narrowest part1.7 mm at this size
Nodes262 curve and line segments

Measured from the file. PNG: 1,931 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.96 × 1 in (24 × 25 mm)0.43 mm432 mm100Too fine for most machines
1.93 × 2 in (49 × 51 mm)0.86 mm864 mm25Fine detail: vinyl and paper only, weed with care
2.89 × 3 in (73 × 76 mm)1.3 mm1,296 mm9Vinyl, card and thin sheet
3.86 × 4 in (98 × 102 mm)1.7 mm1,728 mm6Vinyl, card and thin sheet
5.78 × 6 in (147 × 152 mm)2.6 mm2,592 mm2Vinyl, card and thin sheet
7.71 × 8 in (196 × 203 mm)3.5 mm3,456 mm1Any material, including 3 mm wood and acrylic
11.57 × 12 in (294 × 305 mm)5.2 mm5,185 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More door SVG files

← Six-panel door in a frame All 15 doors Door silhouette with a pediment →