Free door SVG

Old door in a stone arch SVG

Old door in a stone arch, as a solid black shape
Old door in a stone arch. The preview is the SVG file itself.

A round-topped plank door in a stone arch: joints cut between the stones, four gaps between the planks, two long strap hinges and a ring handle.

Free for personal and commercial use, no sign-up. What you can do with it.

This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.

What is in the file

Size80 × 100 mm (3.14 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut31: 1 outer edge and 30 cut-outs
Cut length1,501 mm at this size
Narrowest part2.5 mm at this size
Nodes169 curve and line segments

Measured from the file. PNG: 1,612 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.8 × 1 in (20 × 25 mm)0.64 mm381 mm120Fine detail: vinyl and paper only, weed with care
1.6 × 2 in (41 × 51 mm)1.3 mm763 mm30Vinyl, card and thin sheet
2.39 × 3 in (61 × 76 mm)1.9 mm1,144 mm12Vinyl, card and thin sheet
3.19 × 4 in (81 × 102 mm)2.5 mm1,525 mm6Vinyl, card and thin sheet
4.79 × 6 in (122 × 152 mm)3.8 mm2,288 mm2Any material, including 3 mm wood and acrylic
6.38 × 8 in (162 × 203 mm)5.1 mm3,050 mm1Any material, including 3 mm wood and acrylic
9.58 × 12 in (243 × 305 mm)7.6 mm4,575 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More door SVG files

← Open door All 15 doors Christmas door with a wreath →