Free door SVG

Saloon door with swinging leaves SVG

Saloon door with swinging leaves, as a solid black shape
Saloon door with swinging leaves. The preview is the SVG file itself.

A pair of Western batwing doors: two curved leaves with louvre slats, each hung on two hinges from a tall post with a ball on top. A strip of floor joins the posts.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size95 × 100 mm (3.72 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut11: 1 outer edge and 10 cut-outs
Cut length1,105 mm at this size
Narrowest part3.5 mm at this size
Nodes114 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,896 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.95 × 1 in (24 × 25 mm)0.89 mm281 mm100Fine detail: vinyl and paper only, weed with care
1.89 × 2 in (48 × 51 mm)1.8 mm561 mm25Vinyl, card and thin sheet
2.84 × 3 in (72 × 76 mm)2.7 mm842 mm12Vinyl, card and thin sheet
3.78 × 4 in (96 × 102 mm)3.6 mm1,123 mm6Any material, including 3 mm wood and acrylic
5.68 × 6 in (144 × 152 mm)5.3 mm1,684 mm2Any material, including 3 mm wood and acrylic
7.57 × 8 in (192 × 203 mm)7.1 mm2,245 mm1Any material, including 3 mm wood and acrylic
11.35 × 12 in (288 × 305 mm)11 mm3,368 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More door SVG files

← Garage door with windows All 15 doors Front porch with a door and steps →