Free door SVG

Door outline SVG

Door outline, drawn as a line
Door outline. The preview is the SVG file itself.

The six-panel door as a joined line drawing: frame, leaf, the rails and middle stile that divide it into six panels, a round knob on the lock rail, a cornice and a step. For colouring, foil and pen plotters.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size71 × 100 mm (2.81 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length1,575 mm at this size
Narrowest part2.2 mm at this size
Nodes74 curve and line segments

Measured from the file. PNG: 1,450 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.71 × 1 in (18 × 25 mm)0.56 mm400 mm130Fine detail: vinyl and paper only, weed with care
1.43 × 2 in (36 × 51 mm)1.1 mm800 mm35Vinyl, card and thin sheet
2.14 × 3 in (54 × 76 mm)1.7 mm1,200 mm15Vinyl, card and thin sheet
2.86 × 4 in (73 × 102 mm)2.2 mm1,600 mm6Vinyl, card and thin sheet
4.28 × 6 in (109 × 152 mm)3.4 mm2,400 mm2Any material, including 3 mm wood and acrylic
5.71 × 8 in (145 × 203 mm)4.5 mm3,200 mm2Any material, including 3 mm wood and acrylic
8.57 × 12 in (218 × 305 mm)6.7 mm4,801 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More door SVG files

← Arched doorway frame All 15 doors Layered red front door with a wreath →