Free door SVG

Open door SVG

Open door, as a solid black shape
Open door. The preview is the SVG file itself.

A door standing ajar: the leaf swings towards you, its two panels narrowing with the perspective, the dark of the room shows past its edge and light falls across the floor.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size81 × 100 mm (3.19 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length730 mm at this size
Narrowest part6 mm at this size
Nodes45 curve and line segments

Measured from the file. PNG: 1,633 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.81 × 1 in (21 × 25 mm)1.5 mm185 mm120Vinyl, card and thin sheet
1.62 × 2 in (41 × 51 mm)3 mm371 mm30Any material, including 3 mm wood and acrylic
2.43 × 3 in (62 × 76 mm)4.6 mm556 mm12Any material, including 3 mm wood and acrylic
3.24 × 4 in (82 × 102 mm)6.1 mm742 mm6Any material, including 3 mm wood and acrylic
4.85 × 6 in (123 × 152 mm)9.1 mm1,113 mm2Any material, including 3 mm wood and acrylic
6.47 × 8 in (164 × 203 mm)12 mm1,483 mm1Any material, including 3 mm wood and acrylic
9.71 × 12 in (247 × 305 mm)18 mm2,225 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More door SVG files

← Door silhouette with a pediment All 15 doors Old door in a stone arch →