Free door SVG

Door hanger blank SVG

Door hanger blank, as a solid black shape
Door hanger blank. The preview is the SVG file itself.

A door-knob hanger: a tall rounded tag with a round hole and a slanted slot to slip it over the handle, and corner cuts marking a blank panel for your own words.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size44 × 100 mm (1.73 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length423 mm at this size
Narrowest part6 mm at this size
Nodes55 curve and line segments

Measured from the file. PNG: 923 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.44 × 1 in (11 × 25 mm)1.5 mm107 mm190Vinyl, card and thin sheet
0.88 × 2 in (22 × 51 mm)3 mm215 mm55Any material, including 3 mm wood and acrylic
1.32 × 3 in (34 × 76 mm)4.6 mm322 mm24Any material, including 3 mm wood and acrylic
1.76 × 4 in (45 × 102 mm)6.1 mm430 mm12Any material, including 3 mm wood and acrylic
2.64 × 6 in (67 × 152 mm)9.1 mm645 mm4Any material, including 3 mm wood and acrylic
3.52 × 8 in (89 × 203 mm)12 mm860 mm3Any material, including 3 mm wood and acrylic
5.28 × 12 in (134 × 305 mm)18 mm1,289 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More door SVG files

← Dutch door with the top half open All 15 doors Arched doorway frame →