Don’t Ruffle My Feathers in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Don’t Ruffle My Feathers” set in Lilita One, a chunky rounded sans, on 3 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 69 mm (3.94 × 2.7 in), scales to any size |
|---|---|
| Pieces | 21 separate pieces |
| Outlines to cut | 28: 21 outer edges and 7 cut-outs |
| Cut length | 1,164 mm at this size |
| Narrowest part | 2.9 mm at this size |
| Nodes | 441 curve and line segments |
Measured from the file. PNG: 2,000 × 1,398 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.69 in (25 × 17 mm) | 0.74 mm | 296 mm | 130 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.37 in (51 × 35 mm) | 1.5 mm | 591 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.06 in (76 × 52 mm) | 2.2 mm | 887 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.75 in (102 × 70 mm) | 2.9 mm | 1,183 mm | 8 | Vinyl, card and thin sheet |
| 6 × 4.12 in (152 × 105 mm) | 4.4 mm | 1,774 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.5 in (203 × 140 mm) | 5.9 mm | 2,365 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.24 in (305 × 209 mm) | 8.8 mm | 3,548 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Don’t Ruffle My Feathers SVG files
-
Don’t Ruffle My Feathers in Alfa Slab One Solid · 19 pieces -
Don’t Ruffle My Feathers in Amatic SC Solid · 21 pieces -
Don’t Ruffle My Feathers in block capitals Solid · 21 pieces -
Don’t Ruffle My Feathers in script and capitals Solid · 20 pieces -
Don’t Ruffle My Feathers with hearts Solid · 17 pieces -
Don’t Ruffle My Feathers outline lettering Outline · 23 pieces -
Don’t Ruffle My Feathers stencil plate Solid · one piece -
Don’t Ruffle My Feathers with a drop shadow Layered · 14 pieces
← Don’t Ruffle My Feathers in Kaushan Script All 12 Don’t Ruffle My Feathers designs Don’t Ruffle My Feathers in Alfa Slab One →