Don’t Ruffle My Feathers with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Don’t Ruffle My Feathers” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 90 mm (3.94 × 3.53 in), scales to any size |
|---|---|
| Pieces | 14 separate pieces |
| Outlines to cut | 37: 14 outer edges and 23 cut-outs |
| Cut length | 2,418 mm at this size |
| Narrowest part | 1 mm at this size |
| Nodes | 832 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,802 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.9 in (25 × 23 mm) | 0.25 mm | 614 mm | 110 | Too fine for most machines |
| 2 × 1.79 in (51 × 46 mm) | 0.51 mm | 1,228 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.69 in (76 × 68 mm) | 0.76 mm | 1,843 mm | 12 | Fine detail: vinyl and paper only, weed with care |
| 4 × 3.59 in (102 × 91 mm) | 1 mm | 2,457 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.38 in (152 × 137 mm) | 1.5 mm | 3,685 mm | 2 | Vinyl, card and thin sheet |
| 8 × 7.18 in (203 × 182 mm) | 2 mm | 4,913 mm | 1 | Vinyl, card and thin sheet |
| 12 × 10.76 in (305 × 273 mm) | 3 mm | 7,370 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Don’t Ruffle My Feathers SVG files
-
Don’t Ruffle My Feathers with a hen Solid · 21 pieces
-
Don’t Ruffle My Feathers in Pacifico Solid · 9 pieces
-
Don’t Ruffle My Feathers in Lobster Solid · 11 pieces
-
Don’t Ruffle My Feathers in Kaushan Script Solid · 21 pieces
-
Don’t Ruffle My Feathers in Lilita One Solid · 21 pieces
-
Don’t Ruffle My Feathers in Alfa Slab One Solid · 19 pieces
-
Don’t Ruffle My Feathers in Amatic SC Solid · 21 pieces
-
Don’t Ruffle My Feathers in block capitals Solid · 21 pieces
← Don’t Ruffle My Feathers stencil plate All 13 Don’t Ruffle My Feathers designs Don’t Ruffle My Feathers with a hen →