Don’t Ruffle My Feathers in Alfa Slab One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Don’t Ruffle My Feathers” set in Alfa Slab One, a very heavy slab serif, on 3 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.
What is in the file
| Size | 100 × 61 mm (3.94 × 2.41 in), scales to any size |
|---|---|
| Pieces | 19 separate pieces |
| Outlines to cut | 26: 19 outer edges and 7 cut-outs |
| Cut length | 1,229 mm at this size |
| Narrowest part | 1.7 mm at this size |
| Nodes | 383 curve and line segments |
Measured from the file. PNG: 2,000 × 1,252 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.61 in (25 × 16 mm) | 0.43 mm | 312 mm | 150 | Too fine for most machines |
| 2 × 1.22 in (51 × 31 mm) | 0.86 mm | 624 mm | 40 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.83 in (76 × 47 mm) | 1.3 mm | 936 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.44 in (102 × 62 mm) | 1.7 mm | 1,249 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.67 in (152 × 93 mm) | 2.6 mm | 1,873 mm | 3 | Vinyl, card and thin sheet |
| 8 × 4.89 in (203 × 124 mm) | 3.5 mm | 2,497 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.33 in (305 × 186 mm) | 5.2 mm | 3,746 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Don’t Ruffle My Feathers SVG files
-
Don’t Ruffle My Feathers in Amatic SC Solid · 21 pieces
-
Don’t Ruffle My Feathers in block capitals Solid · 21 pieces
-
Don’t Ruffle My Feathers in script and capitals Solid · 20 pieces
-
Don’t Ruffle My Feathers with hearts Solid · 17 pieces
-
Don’t Ruffle My Feathers outline lettering Outline · 23 pieces
-
Don’t Ruffle My Feathers stencil plate Solid · one piece
-
Don’t Ruffle My Feathers with a drop shadow Layered · 14 pieces
-
Don’t Ruffle My Feathers with a hen Solid · 21 pieces
← Don’t Ruffle My Feathers in Lilita One All 13 Don’t Ruffle My Feathers designs Don’t Ruffle My Feathers in Amatic SC →