Don’t Ruffle My Feathers in script and capitals SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Don’t” in Pacifico script over “RUFFLE MY FEATHERS” in narrow capitals, the two lines made the same width. Mixing a script with capitals is the classic sign-painter’s pairing.
What is in the file
| Size | 100 × 98 mm (3.94 × 3.87 in), scales to any size |
|---|---|
| Pieces | 20 separate pieces |
| Outlines to cut | 25: 20 outer edges and 5 cut-outs |
| Cut length | 2,035 mm at this size |
| Narrowest part | 2.2 mm at this size |
| Nodes | 342 curve and line segments |
Measured from the file. PNG: 2,000 × 1,965 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.98 in (25 × 25 mm) | 0.56 mm | 517 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.96 in (51 × 50 mm) | 1.1 mm | 1,034 mm | 25 | Vinyl, card and thin sheet |
| 3 × 2.95 in (76 × 75 mm) | 1.7 mm | 1,551 mm | 9 | Vinyl, card and thin sheet |
| 4 × 3.93 in (102 × 100 mm) | 2.2 mm | 2,068 mm | 4 | Vinyl, card and thin sheet |
| 6 × 5.89 in (152 × 150 mm) | 3.4 mm | 3,101 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.86 in (203 × 200 mm) | 4.5 mm | 4,135 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.78 in (305 × 299 mm) | 6.7 mm | 6,203 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Don’t Ruffle My Feathers SVG files
-
Don’t Ruffle My Feathers with hearts Solid · 17 pieces -
Don’t Ruffle My Feathers outline lettering Outline · 23 pieces -
Don’t Ruffle My Feathers stencil plate Solid · one piece -
Don’t Ruffle My Feathers with a drop shadow Layered · 14 pieces -
Don’t Ruffle My Feathers in Pacifico Solid · 9 pieces -
Don’t Ruffle My Feathers in Lobster Solid · 11 pieces -
Don’t Ruffle My Feathers in Kaushan Script Solid · 20 pieces -
Don’t Ruffle My Feathers in Lilita One Solid · 21 pieces
← Don’t Ruffle My Feathers in block capitals All 12 Don’t Ruffle My Feathers designs Don’t Ruffle My Feathers with hearts →