Don’t Ruffle My Feathers in Kaushan Script SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Don’t Ruffle My Feathers” set in Kaushan Script, a lively brush script, on 3 centred lines. It leans forward with the uneven edge of a loaded brush, which suits informal signs and shirts.
What is in the file
| Size | 100 × 79 mm (3.94 × 3.13 in), scales to any size |
|---|---|
| Pieces | 21 separate pieces |
| Outlines to cut | 28: 21 outer edges and 7 cut-outs |
| Cut length | 1,533 mm at this size |
| Narrowest part | 0.8 mm at this size |
| Nodes | 658 curve and line segments |
Measured from the file. PNG: 2,000 × 1,604 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.79 in (25 × 20 mm) | 0.2 mm | 389 mm | 120 | Too fine for most machines |
| 2 × 1.59 in (51 × 40 mm) | 0.41 mm | 779 mm | 30 | Too fine for most machines |
| 3 × 2.38 in (76 × 61 mm) | 0.61 mm | 1,168 mm | 12 | Fine detail: vinyl and paper only, weed with care |
| 4 × 3.18 in (102 × 81 mm) | 0.81 mm | 1,558 mm | 6 | Fine detail: vinyl and paper only, weed with care |
| 6 × 4.76 in (152 × 121 mm) | 1.2 mm | 2,336 mm | 2 | Vinyl, card and thin sheet |
| 8 × 6.35 in (203 × 161 mm) | 1.6 mm | 3,115 mm | 1 | Vinyl, card and thin sheet |
| 12 × 9.53 in (305 × 242 mm) | 2.4 mm | 4,673 mm | 1 | Vinyl, card and thin sheet |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Don’t Ruffle My Feathers SVG files
-
Don’t Ruffle My Feathers in Lilita One Solid · 21 pieces
-
Don’t Ruffle My Feathers in Alfa Slab One Solid · 19 pieces
-
Don’t Ruffle My Feathers in Amatic SC Solid · 21 pieces
-
Don’t Ruffle My Feathers in block capitals Solid · 21 pieces
-
Don’t Ruffle My Feathers in script and capitals Solid · 20 pieces
-
Don’t Ruffle My Feathers with hearts Solid · 17 pieces
-
Don’t Ruffle My Feathers outline lettering Outline · 23 pieces
-
Don’t Ruffle My Feathers stencil plate Solid · one piece
← Don’t Ruffle My Feathers in Lobster All 13 Don’t Ruffle My Feathers designs Don’t Ruffle My Feathers in Lilita One →