Don’t Ruffle My Feathers stencil plate SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A rounded plate with “DON’T RUFFLE MY FEATHERS” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.
What is in the file
| Size | 100 × 91 mm (3.94 × 3.58 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 22: 1 outer edge and 21 cut-outs |
| Cut length | 1,839 mm at this size |
| Narrowest part | 1.7 mm at this size |
| Nodes | 462 curve and line segments |
Measured from the file. PNG: 2,000 × 1,827 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.91 in (25 × 23 mm) | 0.43 mm | 467 mm | 100 | Too fine for most machines |
| 2 × 1.82 in (51 × 46 mm) | 0.86 mm | 934 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.73 in (76 × 69 mm) | 1.3 mm | 1,401 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.64 in (102 × 92 mm) | 1.7 mm | 1,868 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.46 in (152 × 139 mm) | 2.6 mm | 2,803 mm | 2 | Vinyl, card and thin sheet |
| 8 × 7.28 in (203 × 185 mm) | 3.5 mm | 3,737 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.92 in (305 × 277 mm) | 5.2 mm | 5,605 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Don’t Ruffle My Feathers SVG files
-
Don’t Ruffle My Feathers with a drop shadow Layered · 14 pieces -
Don’t Ruffle My Feathers in Pacifico Solid · 9 pieces -
Don’t Ruffle My Feathers in Lobster Solid · 11 pieces -
Don’t Ruffle My Feathers in Kaushan Script Solid · 20 pieces -
Don’t Ruffle My Feathers in Lilita One Solid · 21 pieces -
Don’t Ruffle My Feathers in Alfa Slab One Solid · 19 pieces -
Don’t Ruffle My Feathers in Amatic SC Solid · 21 pieces -
Don’t Ruffle My Feathers in block capitals Solid · 21 pieces
← Don’t Ruffle My Feathers outline lettering All 12 Don’t Ruffle My Feathers designs Don’t Ruffle My Feathers with a drop shadow →