Daddy stencil plate SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A rounded plate with “DADDY” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.
What is in the file
| Size | 100 × 42 mm (3.94 × 1.63 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 6: 1 outer edge and 5 cut-outs |
| Cut length | 823 mm at this size |
| Narrowest part | 1.6 mm at this size |
| Nodes | 123 curve and line segments |
Measured from the file. PNG: 2,000 × 875 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.42 in (25 × 11 mm) | 0.41 mm | 209 mm | 190 | Too fine for most machines |
| 2 × 0.83 in (51 × 21 mm) | 0.81 mm | 418 mm | 55 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.24 in (76 × 32 mm) | 1.2 mm | 627 mm | 24 | Vinyl, card and thin sheet |
| 4 × 1.66 in (102 × 42 mm) | 1.6 mm | 836 mm | 12 | Vinyl, card and thin sheet |
| 6 × 2.49 in (152 × 63 mm) | 2.4 mm | 1,254 mm | 4 | Vinyl, card and thin sheet |
| 8 × 3.32 in (203 × 84 mm) | 3.3 mm | 1,672 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 4.98 in (305 × 126 mm) | 4.9 mm | 2,509 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Daddy SVG files
-
Daddy with a drop shadow Layered · 4 pieces
-
Daddy with a handlebar moustache Solid · 3 pieces
-
Daddy in Pacifico Solid · 2 pieces
-
Daddy in Lobster Solid · 2 pieces
-
Daddy in Kaushan Script Solid · 5 pieces
-
Daddy in Lilita One Solid · 5 pieces
-
Daddy in Alfa Slab One Solid · 5 pieces
-
Daddy in Amatic SC Solid · 5 pieces
← Daddy outline lettering All 13 Daddy designs Daddy with a drop shadow →