Free Daddy SVG

Daddy outline lettering SVG

Daddy outline lettering, drawn as a line — Daddy outline lettering. The preview is the SVG file itself.

“Daddy” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 31 mm (3.94 × 1.21 in), scales to any size
Pieces	9 separate pieces
Outlines to cut	18: 9 outer edges and 9 cut-outs
Cut length	907 mm at this size
Narrowest part	1.4 mm at this size
Nodes	227 curve and line segments

Measured from the file. PNG: 2,000 × 667 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.31 in (25 × 8 mm)	0.36 mm	230 mm	240	Too fine for most machines
2 × 0.61 in (51 × 16 mm)	0.71 mm	461 mm	70	Fine detail: vinyl and paper only, weed with care
3 × 0.92 in (76 × 23 mm)	1.1 mm	691 mm	30	Vinyl, card and thin sheet
4 × 1.23 in (102 × 31 mm)	1.4 mm	922 mm	16	Vinyl, card and thin sheet
6 × 1.84 in (152 × 47 mm)	2.1 mm	1,382 mm	5	Vinyl, card and thin sheet
8 × 2.46 in (203 × 62 mm)	2.8 mm	1,843 mm	4	Vinyl, card and thin sheet
12 × 3.68 in (305 × 94 mm)	4.3 mm	2,765 mm	3	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Daddy SVG files

← Daddy with stars All 12 Daddy designs Daddy stencil plate →