Free Daddy SVG

Daddy in Pacifico SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Daddy in Pacifico, as a solid black shape
Daddy in Pacifico. The preview is the SVG file itself.

“Daddy” set in Pacifico, a bold brush script. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

What is in the file

Size100 × 49 mm (3.94 × 1.93 in), scales to any size
Pieces2 separate pieces
Outlines to cut8: 2 outer edges and 6 cut-outs
Cut length704 mm at this size
Narrowest part2.2 mm at this size
Nodes166 curve and line segments

Measured from the file. PNG: 2,000 × 1,019 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.49 in (25 × 12 mm)0.56 mm179 mm170Fine detail: vinyl and paper only, weed with care
2 × 0.98 in (51 × 25 mm)1.1 mm358 mm50Vinyl, card and thin sheet
3 × 1.47 in (76 × 37 mm)1.7 mm536 mm21Vinyl, card and thin sheet
4 × 1.96 in (102 × 50 mm)2.2 mm715 mm10Vinyl, card and thin sheet
6 × 2.94 in (152 × 75 mm)3.4 mm1,073 mm3Any material, including 3 mm wood and acrylic
8 × 3.92 in (203 × 100 mm)4.5 mm1,431 mm2Any material, including 3 mm wood and acrylic
12 × 5.88 in (305 × 149 mm)6.7 mm2,146 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Daddy SVG files

← Daddy with a handlebar moustache All 13 Daddy designs Daddy in Lobster →