Free Daddy SVG

Daddy in block capitals SVG

Daddy in block capitals, as a solid black shape — Daddy in block capitals. The preview is the SVG file itself.

“DADDY” in the tall, narrow capitals of Bebas Neue. Each letter is a separate piece with thick, even strokes.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 36 mm (3.94 × 1.42 in), scales to any size
Pieces	5 separate pieces
Outlines to cut	9: 5 outer edges and 4 cut-outs
Cut length	754 mm at this size
Narrowest part	4.7 mm at this size
Nodes	65 curve and line segments

Measured from the file. PNG: 2,000 × 769 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.36 in (25 × 9 mm)	1.2 mm	192 mm	210	Vinyl, card and thin sheet
2 × 0.72 in (51 × 18 mm)	2.4 mm	383 mm	65	Vinyl, card and thin sheet
3 × 1.08 in (76 × 27 mm)	3.6 mm	575 mm	27	Any material, including 3 mm wood and acrylic
4 × 1.44 in (102 × 37 mm)	4.8 mm	766 mm	14	Any material, including 3 mm wood and acrylic
6 × 2.16 in (152 × 55 mm)	7.2 mm	1,149 mm	5	Any material, including 3 mm wood and acrylic
8 × 2.88 in (203 × 73 mm)	9.6 mm	1,532 mm	3	Any material, including 3 mm wood and acrylic
12 × 4.32 in (305 × 110 mm)	14 mm	2,298 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Daddy SVG files

← Daddy in Amatic SC All 12 Daddy designs Daddy with a swash underline →