Free Daddy SVG

Daddy with a handlebar moustache SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Daddy with a handlebar moustache, as a solid black shape — Daddy with a handlebar moustache. The preview is the SVG file itself.

“Daddy” with a handlebar moustache above the words, which are set in Lobster. The picture is a separate piece, so it can be cut in a second colour or left off.

What is in the file

Size	100 × 58 mm (3.94 × 2.27 in), scales to any size
Pieces	3 separate pieces
Outlines to cut	7: 3 outer edges and 4 cut-outs
Cut length	846 mm at this size
Narrowest part	1.4 mm at this size
Nodes	179 curve and line segments

Measured from the file. PNG: 2,000 × 1,187 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.58 in (25 × 15 mm)	0.36 mm	215 mm	150	Too fine for most machines
2 × 1.15 in (51 × 29 mm)	0.71 mm	430 mm	45	Fine detail: vinyl and paper only, weed with care
3 × 1.73 in (76 × 44 mm)	1.1 mm	645 mm	18	Vinyl, card and thin sheet
4 × 2.31 in (102 × 59 mm)	1.4 mm	860 mm	8	Vinyl, card and thin sheet
6 × 3.46 in (152 × 88 mm)	2.1 mm	1,289 mm	3	Vinyl, card and thin sheet
8 × 4.62 in (203 × 117 mm)	2.8 mm	1,719 mm	2	Vinyl, card and thin sheet
12 × 6.92 in (305 × 176 mm)	4.3 mm	2,579 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Daddy SVG files

← Daddy with a drop shadow All 13 Daddy designs Daddy in Pacifico →