Daddy in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Daddy” set in Lilita One, a chunky rounded sans. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 33 mm (3.94 × 1.28 in), scales to any size |
|---|---|
| Pieces | 5 separate pieces |
| Outlines to cut | 9: 5 outer edges and 4 cut-outs |
| Cut length | 489 mm at this size |
| Narrowest part | 3.8 mm at this size |
| Nodes | 103 curve and line segments |
Measured from the file. PNG: 2,000 × 702 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.33 in (25 × 8 mm) | 0.97 mm | 124 mm | 230 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.65 in (51 × 17 mm) | 1.9 mm | 248 mm | 70 | Vinyl, card and thin sheet |
| 3 × 0.98 in (76 × 25 mm) | 2.9 mm | 373 mm | 30 | Vinyl, card and thin sheet |
| 4 × 1.3 in (102 × 33 mm) | 3.9 mm | 497 mm | 16 | Any material, including 3 mm wood and acrylic |
| 6 × 1.95 in (152 × 50 mm) | 5.8 mm | 745 mm | 5 | Any material, including 3 mm wood and acrylic |
| 8 × 2.6 in (203 × 66 mm) | 7.7 mm | 994 mm | 4 | Any material, including 3 mm wood and acrylic |
| 12 × 3.9 in (305 × 99 mm) | 12 mm | 1,490 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Daddy SVG files
-
Daddy in Alfa Slab One Solid · 5 pieces
-
Daddy in Amatic SC Solid · 5 pieces
-
Daddy in block capitals Solid · 5 pieces
-
Daddy with a swash underline Solid · 3 pieces
-
Daddy with stars Solid · 8 pieces
-
Daddy outline lettering Outline · 9 pieces
-
Daddy stencil plate Solid · one piece
-
Daddy with a drop shadow Layered · 4 pieces
← Daddy in Kaushan Script All 13 Daddy designs Daddy in Alfa Slab One →