Free Daddy SVG

Daddy in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Daddy in Lobster, as a solid black shape
Daddy in Lobster. The preview is the SVG file itself.

“Daddy” set in Lobster, a bold upright script. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 36 mm (3.94 × 1.43 in), scales to any size
Pieces2 separate pieces
Outlines to cut6: 2 outer edges and 4 cut-outs
Cut length652 mm at this size
Narrowest part1.4 mm at this size
Nodes141 curve and line segments

Measured from the file. PNG: 2,000 × 773 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.36 in (25 × 9 mm)0.36 mm166 mm210Too fine for most machines
2 × 0.72 in (51 × 18 mm)0.71 mm331 mm65Fine detail: vinyl and paper only, weed with care
3 × 1.09 in (76 × 28 mm)1.1 mm497 mm27Vinyl, card and thin sheet
4 × 1.45 in (102 × 37 mm)1.4 mm662 mm14Vinyl, card and thin sheet
6 × 2.17 in (152 × 55 mm)2.1 mm994 mm5Vinyl, card and thin sheet
8 × 2.9 in (203 × 74 mm)2.8 mm1,325 mm3Vinyl, card and thin sheet
12 × 4.34 in (305 × 110 mm)4.3 mm1,987 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Daddy SVG files

← Daddy in Pacifico All 13 Daddy designs Daddy in Kaushan Script →