Free cursor SVG

Arrow cursor outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Arrow cursor outline. The preview is the SVG file itself.

The arrow pointer as an even line about 3 mm wide with gently rounded corners. Lay it over the solid arrow in a second colour for the white pointer with a dark edge, or use it alone for foil and pen plotters.

What is in the file

Size	63 × 100 mm (2.48 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	594 mm at this size
Narrowest part	2.4 mm at this size
Nodes	23 curve and line segments

Measured from the file. PNG: 1,290 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.63 × 1 in (16 × 25 mm)	0.61 mm	151 mm	140	Fine detail: vinyl and paper only, weed with care
1.26 × 2 in (32 × 51 mm)	1.2 mm	302 mm	40	Vinyl, card and thin sheet
1.89 × 3 in (48 × 76 mm)	1.8 mm	453 mm	15	Vinyl, card and thin sheet
2.52 × 4 in (64 × 102 mm)	2.4 mm	604 mm	8	Vinyl, card and thin sheet
3.79 × 6 in (96 × 152 mm)	3.7 mm	905 mm	3	Any material, including 3 mm wood and acrylic
5.05 × 8 in (128 × 203 mm)	4.9 mm	1,207 mm	2	Any material, including 3 mm wood and acrylic
7.57 × 12 in (192 × 305 mm)	7.3 mm	1,811 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cursor SVG files

← Arrow cursor All 15 cursors Cursor arrowhead icon →