Free cursor SVG

Hourglass cursor for waiting SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hourglass cursor for waiting, as a solid black shape
Hourglass cursor for waiting. The preview is the SVG file itself.

The wait cursor from the days when computers made you wait: a waisted glass in a frame of two bars and two posts, sand left in the top, a thread falling and a pile below.

What is in the file

Size60 × 100 mm (2.36 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length903 mm at this size
Narrowest part2.6 mm at this size
Nodes64 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,231 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.6 × 1 in (15 × 25 mm)0.66 mm229 mm150Fine detail: vinyl and paper only, weed with care
1.2 × 2 in (30 × 51 mm)1.3 mm459 mm40Vinyl, card and thin sheet
1.8 × 3 in (46 × 76 mm)2 mm688 mm18Vinyl, card and thin sheet
2.4 × 4 in (61 × 102 mm)2.6 mm917 mm8Vinyl, card and thin sheet
3.6 × 6 in (91 × 152 mm)4 mm1,376 mm3Any material, including 3 mm wood and acrylic
4.8 × 8 in (122 × 203 mm)5.3 mm1,835 mm2Any material, including 3 mm wood and acrylic
7.2 × 12 in (183 × 305 mm)7.9 mm2,752 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cursor SVG files

← Move cursor with four arrows All 15 cursors Cursor in a solid circle →