Free cursor SVG

Cursor click burst SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Cursor click burst, as a solid black shape
Cursor click burst. The preview is the SVG file itself.

The arrow pointer landing on a spiky burst, the comic-book way of drawing a click. A fine gap parts the arrow from the burst and stops short of the edge, so the two stay one piece.

What is in the file

Size73 × 100 mm (2.87 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length511 mm at this size
Narrowest part2.8 mm at this size
Nodes74 curve and line segments
Also found asCursor click image SVG

Measured from the file. PNG: 1,481 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.73 × 1 in (19 × 25 mm)0.71 mm130 mm130Fine detail: vinyl and paper only, weed with care
1.46 × 2 in (37 × 51 mm)1.4 mm260 mm35Vinyl, card and thin sheet
2.19 × 3 in (56 × 76 mm)2.1 mm389 mm15Vinyl, card and thin sheet
2.92 × 4 in (74 × 102 mm)2.8 mm519 mm6Vinyl, card and thin sheet
4.38 × 6 in (111 × 152 mm)4.3 mm779 mm2Any material, including 3 mm wood and acrylic
5.84 × 8 in (148 × 203 mm)5.7 mm1,038 mm2Any material, including 3 mm wood and acrylic
8.76 × 12 in (223 × 305 mm)8.5 mm1,558 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cursor SVG files

← Glove cursor outline All 15 cursors Text cursor beam →