Free cursor SVG

Glove cursor outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Glove cursor outline, drawn as a line
Glove cursor outline. The preview is the SVG file itself.

The pointing hand drawn as a line, like the white glove pointer of old desktops: the finger, three knuckles, the thumb and a band at the cuff. For colouring, foil and laptop decals in one colour.

What is in the file

Size72 × 100 mm (2.83 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length841 mm at this size
Narrowest part2.3 mm at this size
Nodes141 curve and line segments

Measured from the file. PNG: 1,460 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.72 × 1 in (18 × 25 mm)0.58 mm214 mm130Fine detail: vinyl and paper only, weed with care
1.44 × 2 in (37 × 51 mm)1.2 mm427 mm35Vinyl, card and thin sheet
2.16 × 3 in (55 × 76 mm)1.8 mm641 mm15Vinyl, card and thin sheet
2.88 × 4 in (73 × 102 mm)2.3 mm854 mm6Vinyl, card and thin sheet
4.31 × 6 in (110 × 152 mm)3.5 mm1,282 mm2Any material, including 3 mm wood and acrylic
5.75 × 8 in (146 × 203 mm)4.7 mm1,709 mm2Any material, including 3 mm wood and acrylic
8.63 × 12 in (219 × 305 mm)7 mm2,563 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cursor SVG files

← Hand cursor with a pointing finger All 15 cursors Cursor click burst →