Free Cruise SVG

Cruise with a swash underline SVG

Cruise with a swash underline, as a solid black shape — Cruise with a swash underline. The preview is the SVG file itself.

“Cruise” in Pacifico script with a tapering swash swept underneath it, welded to the word where a letter dips down to meet it, or sitting just below it where none does.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 41 mm (3.94 × 1.59 in), scales to any size
Pieces	3 separate pieces
Outlines to cut	4: 3 outer edges and 1 cut-out
Cut length	696 mm at this size
Narrowest part	2.6 mm at this size
Nodes	237 curve and line segments

Measured from the file. PNG: 2,000 × 856 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.41 in (25 × 10 mm)	0.66 mm	177 mm	200	Fine detail: vinyl and paper only, weed with care
2 × 0.81 in (51 × 21 mm)	1.3 mm	354 mm	60	Vinyl, card and thin sheet
3 × 1.21 in (76 × 31 mm)	2 mm	530 mm	24	Vinyl, card and thin sheet
4 × 1.62 in (102 × 41 mm)	2.6 mm	707 mm	12	Vinyl, card and thin sheet
6 × 2.43 in (152 × 62 mm)	4 mm	1,061 mm	4	Any material, including 3 mm wood and acrylic
8 × 3.24 in (203 × 82 mm)	5.3 mm	1,414 mm	3	Any material, including 3 mm wood and acrylic
12 × 4.86 in (305 × 123 mm)	7.9 mm	2,121 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Cruise SVG files

← Cruise in block capitals All 12 Cruise designs Cruise with stars →