Free Cruise SVG

Cruise with stars SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Cruise with stars, as a solid black shape
Cruise with stars. The preview is the SVG file itself.

“Cruise” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.

What is in the file

Size100 × 64 mm (3.94 × 2.51 in), scales to any size
Pieces9 separate pieces
Outlines to cut11: 9 outer edges and 2 cut-outs
Cut length819 mm at this size
Narrowest part1.5 mm at this size
Nodes187 curve and line segments

Measured from the file. PNG: 2,000 × 1,304 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.64 in (25 × 16 mm)0.38 mm208 mm140Too fine for most machines
2 × 1.28 in (51 × 32 mm)0.76 mm416 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.91 in (76 × 49 mm)1.1 mm624 mm15Vinyl, card and thin sheet
4 × 2.55 in (102 × 65 mm)1.5 mm832 mm8Vinyl, card and thin sheet
6 × 3.83 in (152 × 97 mm)2.3 mm1,248 mm3Vinyl, card and thin sheet
8 × 5.1 in (203 × 130 mm)3 mm1,664 mm2Any material, including 3 mm wood and acrylic
12 × 7.66 in (305 × 194 mm)4.6 mm2,496 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Cruise SVG files

← Cruise with a swash underline All 13 Cruise designs Cruise outline lettering →