Free Cruise SVG

Cruise stencil plate SVG

Cruise stencil plate, as a solid black shape — Cruise stencil plate. The preview is the SVG file itself.

A rounded plate with “CRUISE” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 40 mm (3.94 × 1.58 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	7: 1 outer edge and 6 cut-outs
Cut length	817 mm at this size
Narrowest part	1.7 mm at this size
Nodes	104 curve and line segments

Measured from the file. PNG: 2,000 × 848 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.4 in (25 × 10 mm)	0.43 mm	208 mm	200	Too fine for most machines
2 × 0.8 in (51 × 20 mm)	0.86 mm	415 mm	60	Fine detail: vinyl and paper only, weed with care
3 × 1.2 in (76 × 31 mm)	1.3 mm	623 mm	24	Vinyl, card and thin sheet
4 × 1.6 in (102 × 41 mm)	1.7 mm	830 mm	12	Vinyl, card and thin sheet
6 × 2.41 in (152 × 61 mm)	2.6 mm	1,245 mm	4	Vinyl, card and thin sheet
8 × 3.21 in (203 × 81 mm)	3.5 mm	1,660 mm	3	Any material, including 3 mm wood and acrylic
12 × 4.81 in (305 × 122 mm)	5.2 mm	2,490 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Cruise SVG files

← Cruise outline lettering All 12 Cruise designs Cruise with a drop shadow →