Free Cruise SVG

Cruise in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Cruise in Lobster, as a solid black shape
Cruise in Lobster. The preview is the SVG file itself.

“Cruise” set in Lobster, a bold upright script. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 32 mm (3.94 × 1.24 in), scales to any size
Pieces3 separate pieces
Outlines to cut5: 3 outer edges and 2 cut-outs
Cut length583 mm at this size
Narrowest part1.5 mm at this size
Nodes127 curve and line segments

Measured from the file. PNG: 2,000 × 685 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.32 in (25 × 8 mm)0.38 mm148 mm230Too fine for most machines
2 × 0.63 in (51 × 16 mm)0.76 mm296 mm70Fine detail: vinyl and paper only, weed with care
3 × 0.95 in (76 × 24 mm)1.1 mm444 mm30Vinyl, card and thin sheet
4 × 1.26 in (102 × 32 mm)1.5 mm592 mm16Vinyl, card and thin sheet
6 × 1.9 in (152 × 48 mm)2.3 mm888 mm5Vinyl, card and thin sheet
8 × 2.53 in (203 × 64 mm)3 mm1,185 mm4Any material, including 3 mm wood and acrylic
12 × 3.79 in (305 × 96 mm)4.6 mm1,777 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Cruise SVG files

← Cruise in Pacifico All 13 Cruise designs Cruise in Kaushan Script →