Cruise in Pacifico SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Cruise” set in Pacifico, a bold brush script. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.
What is in the file
| Size | 100 × 32 mm (3.94 × 1.26 in), scales to any size |
|---|---|
| Pieces | 2 separate pieces |
| Outlines to cut | 3: 2 outer edges and 1 cut-out |
| Cut length | 511 mm at this size |
| Narrowest part | 2.6 mm at this size |
| Nodes | 141 curve and line segments |
Measured from the file. PNG: 2,000 × 692 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.32 in (25 × 8 mm) | 0.66 mm | 130 mm | 230 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.64 in (51 × 16 mm) | 1.3 mm | 260 mm | 70 | Vinyl, card and thin sheet |
| 3 × 0.96 in (76 × 24 mm) | 2 mm | 389 mm | 30 | Vinyl, card and thin sheet |
| 4 × 1.28 in (102 × 33 mm) | 2.6 mm | 519 mm | 16 | Vinyl, card and thin sheet |
| 6 × 1.92 in (152 × 49 mm) | 4 mm | 779 mm | 5 | Any material, including 3 mm wood and acrylic |
| 8 × 2.56 in (203 × 65 mm) | 5.3 mm | 1,038 mm | 4 | Any material, including 3 mm wood and acrylic |
| 12 × 3.84 in (305 × 98 mm) | 7.9 mm | 1,558 mm | 3 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Cruise SVG files
-
Cruise in Lobster Solid · 3 pieces
-
Cruise in Kaushan Script Solid · 7 pieces
-
Cruise in Lilita One Solid · 7 pieces
-
Cruise in Alfa Slab One Solid · 7 pieces
-
Cruise in Amatic SC Solid · 6 pieces
-
Cruise in block capitals Solid · 6 pieces
-
Cruise with a swash underline Solid · 3 pieces
-
Cruise with stars Solid · 9 pieces
← Cruise with an anchor All 13 Cruise designs Cruise in Lobster →