Cruise with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Cruise” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 34 mm (3.94 × 1.34 in), scales to any size |
|---|---|
| Pieces | 3 separate pieces |
| Outlines to cut | 6: 3 outer edges and 3 cut-outs |
| Cut length | 938 mm at this size |
| Narrowest part | 3.5 mm at this size |
| Nodes | 250 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 731 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.34 in (25 × 9 mm) | 0.89 mm | 238 mm | 220 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.68 in (51 × 17 mm) | 1.8 mm | 477 mm | 65 | Vinyl, card and thin sheet |
| 3 × 1.02 in (76 × 26 mm) | 2.7 mm | 715 mm | 30 | Vinyl, card and thin sheet |
| 4 × 1.36 in (102 × 35 mm) | 3.6 mm | 953 mm | 14 | Any material, including 3 mm wood and acrylic |
| 6 × 2.04 in (152 × 52 mm) | 5.3 mm | 1,430 mm | 5 | Any material, including 3 mm wood and acrylic |
| 8 × 2.72 in (203 × 69 mm) | 7.1 mm | 1,906 mm | 4 | Any material, including 3 mm wood and acrylic |
| 12 × 4.08 in (305 × 104 mm) | 11 mm | 2,859 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Cruise SVG files
-
Cruise with an anchor Solid · 4 pieces
-
Cruise in Pacifico Solid · 2 pieces
-
Cruise in Lobster Solid · 3 pieces
-
Cruise in Kaushan Script Solid · 7 pieces
-
Cruise in Lilita One Solid · 7 pieces
-
Cruise in Alfa Slab One Solid · 7 pieces
-
Cruise in Amatic SC Solid · 6 pieces
-
Cruise in block capitals Solid · 6 pieces
← Cruise stencil plate All 13 Cruise designs Cruise with an anchor →