Free corgi SVG

Layered corgi face in three colours SVG

Layered corgi face in three colours, in layered colours
Layered corgi face in three colours. The preview is the SVG file itself.

Three layers to stack: a red-gold head, a white blaze and muzzle with pale inner ears, and the dark eyes, nose and mouth on top. Cut each from its own sheet of card or vinyl.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size86 × 100 mm (3.38 × 3.94 in), scales to any size
Pieces7 separate pieces
Outlines to cut7 outlines
Cut length824 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes182 curve and line segments
Layers3: head, blaze, muzzle and ears and details

Measured from the file. PNG: 1,729 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.86 × 1 in (22 × 25 mm)Over 1.5 mm209 mm110Vinyl, card and thin sheet
1.72 × 2 in (44 × 51 mm)Over 3 mm419 mm30Any material, including 3 mm wood and acrylic
2.58 × 3 in (65 × 76 mm)Over 4.6 mm628 mm12Any material, including 3 mm wood and acrylic
3.44 × 4 in (87 × 102 mm)Over 6.1 mm837 mm6Any material, including 3 mm wood and acrylic
5.15 × 6 in (131 × 152 mm)Over 9.1 mm1,256 mm2Any material, including 3 mm wood and acrylic
6.87 × 8 in (175 × 203 mm)Over 12 mm1,674 mm1Any material, including 3 mm wood and acrylic
10.31 × 12 in (262 × 305 mm)Over 18 mm2,512 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More corgi SVG files

← Corgi mum and pup All 13 corgis Corgi standing →