Free corgi SVG

Corgi face SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Corgi face, as a solid black shape
Corgi face. The preview is the SVG file itself.

A corgi looking straight at you with its ears up. The white blaze and muzzle are one cut-out with the nose left standing in it, so pale card behind the face finishes the markings.

What is in the file

Size86 × 100 mm (3.38 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length794 mm at this size
Narrowest part2.6 mm at this size
Nodes202 curve and line segments
Also found asCorgi icon SVG

Measured from the file. PNG: 1,729 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.86 × 1 in (22 × 25 mm)0.66 mm202 mm110Fine detail: vinyl and paper only, weed with care
1.72 × 2 in (44 × 51 mm)1.3 mm403 mm30Vinyl, card and thin sheet
2.58 × 3 in (65 × 76 mm)2 mm605 mm12Vinyl, card and thin sheet
3.44 × 4 in (87 × 102 mm)2.6 mm807 mm6Vinyl, card and thin sheet
5.15 × 6 in (131 × 152 mm)4 mm1,210 mm2Any material, including 3 mm wood and acrylic
6.87 × 8 in (175 × 203 mm)5.3 mm1,613 mm1Any material, including 3 mm wood and acrylic
10.31 × 12 in (262 × 305 mm)7.9 mm2,420 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More corgi SVG files

← Layered corgi face in three colours All 13 corgis Corgi standing →