Free corgi SVG

Corgi outline SVG

Corgi outline, drawn as a line — Corgi outline. The preview is the SVG file itself.

The standing corgi as one even line about 2 mm wide in a closed loop, with nothing inside it. For colouring pages, foil, engraving and pen plotters.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 88 mm (3.94 × 3.46 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	788 mm at this size
Narrowest part	2.2 mm at this size
Nodes	300 curve and line segments

Measured from the file. PNG: 2,000 × 1,767 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.88 in (25 × 22 mm)	0.56 mm	200 mm	110	Fine detail: vinyl and paper only, weed with care
2 × 1.76 in (51 × 45 mm)	1.1 mm	400 mm	30	Vinyl, card and thin sheet
3 × 2.64 in (76 × 67 mm)	1.7 mm	600 mm	12	Vinyl, card and thin sheet
4 × 3.52 in (102 × 89 mm)	2.2 mm	801 mm	6	Vinyl, card and thin sheet
6 × 5.27 in (152 × 134 mm)	3.4 mm	1,201 mm	2	Any material, including 3 mm wood and acrylic
8 × 7.03 in (203 × 179 mm)	4.5 mm	1,601 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.55 in (305 × 268 mm)	6.7 mm	2,402 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More corgi SVG files

← Corgi from behind with a heart All 13 corgis Corgi in a heart →