Free corgi SVG

Corgi standing SVG

Corgi standing, as a solid black shape — Corgi standing. The preview is the SVG file itself.

A corgi in side view: two big upright ears, a fox face, a long low body on four short legs, a white bib and a fluffy rump with a stub of a tail. The bib, eye, ear and thigh are cut through.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 88 mm (3.94 × 3.46 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	5: 1 outer edge and 4 cut-outs
Cut length	574 mm at this size
Narrowest part	2.5 mm at this size
Nodes	197 curve and line segments

Measured from the file. PNG: 2,000 × 1,767 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.88 in (25 × 22 mm)	0.64 mm	146 mm	110	Fine detail: vinyl and paper only, weed with care
2 × 1.76 in (51 × 45 mm)	1.3 mm	292 mm	30	Vinyl, card and thin sheet
3 × 2.64 in (76 × 67 mm)	1.9 mm	437 mm	12	Vinyl, card and thin sheet
4 × 3.52 in (102 × 89 mm)	2.5 mm	583 mm	6	Vinyl, card and thin sheet
6 × 5.27 in (152 × 134 mm)	3.8 mm	875 mm	2	Any material, including 3 mm wood and acrylic
8 × 7.03 in (203 × 179 mm)	5.1 mm	1,166 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.55 in (305 × 268 mm)	7.6 mm	1,750 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More corgi SVG files

← Layered corgi face in three colours All 13 corgis Corgi face →