Construction shovel and pickaxe crossed SVG
A pointed shovel with a D handle crossed with a pickaxe, both heads up, the shovel in front. A short gap either side of the shovel’s shaft shows where the two cross.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 90 × 100 mm (3.54 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 4: 1 outer edge and 3 cut-outs |
| Cut length | 696 mm at this size |
| Narrowest part | 2.3 mm at this size |
| Nodes | 73 curve and line segments |
Measured from the file. PNG: 1,808 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.9 × 1 in (23 × 25 mm) | 0.58 mm | 177 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 1.8 × 2 in (46 × 51 mm) | 1.2 mm | 354 mm | 30 | Vinyl, card and thin sheet |
| 2.7 × 3 in (69 × 76 mm) | 1.8 mm | 530 mm | 12 | Vinyl, card and thin sheet |
| 3.6 × 4 in (91 × 102 mm) | 2.3 mm | 707 mm | 6 | Vinyl, card and thin sheet |
| 5.4 × 6 in (137 × 152 mm) | 3.5 mm | 1,061 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.2 × 8 in (183 × 203 mm) | 4.7 mm | 1,414 mm | 1 | Any material, including 3 mm wood and acrylic |
| 10.8 × 12 in (274 × 305 mm) | 7 mm | 2,121 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More construction SVG files
-
Construction hard hat with hammer and wrench Solid · one piece -
Construction brick wall with a trowel Solid · one piece -
Construction monogram frame Solid · one piece -
Layered construction cone in three colours Layered · 4 pieces -
Construction hard hat Solid · one piece -
Construction hard hat from the front Solid · one piece -
Construction traffic cone Solid · one piece -
Construction excavator Solid · one piece
← Construction wheelbarrow All 16 construction designs Construction hard hat with hammer and wrench →