Free construction SVG

Construction hard hat SVG

Construction hard hat, as a solid black shape — Construction hard hat. The preview is the SVG file itself.

A hard hat seen from the side: a dome with a raised rib along the top, two rib lines down the shell and a brim that runs forward into a short peak. One solid piece.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 53 mm (3.94 × 2.07 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	489 mm at this size
Narrowest part	4.1 mm at this size
Nodes	61 curve and line segments

Measured from the file. PNG: 2,000 × 1,087 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.53 in (25 × 13 mm)	1 mm	124 mm	160	Vinyl, card and thin sheet
2 × 1.05 in (51 × 27 mm)	2.1 mm	248 mm	45	Vinyl, card and thin sheet
3 × 1.58 in (76 × 40 mm)	3.1 mm	373 mm	18	Any material, including 3 mm wood and acrylic
4 × 2.1 in (102 × 53 mm)	4.2 mm	497 mm	10	Any material, including 3 mm wood and acrylic
6 × 3.15 in (152 × 80 mm)	6.2 mm	745 mm	3	Any material, including 3 mm wood and acrylic
8 × 4.2 in (203 × 107 mm)	8.3 mm	994 mm	2	Any material, including 3 mm wood and acrylic
12 × 6.3 in (305 × 160 mm)	12 mm	1,490 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More construction SVG files

← Layered construction cone in three colours All 16 construction designs Construction hard hat from the front →